Job Aborted Failure In Uio Create Address From Ip Address Link ★ Reliable & Popular

Add a custom udev rule:

If you’ve encountered this error, you likely saw it in a system log, a batch job output (like SLURM or PBS), or a custom embedded application that crashed unexpectedly. The job aborted, and the culprit points to a failure while trying to create a memory address mapping from an IP address and network link. Add a custom udev rule: If you’ve encountered

ip link show ethtool -i eth0 # Replace with your interface Then check which driver is bound: /sys/bus/pci/drivers/ixgbe/unbind echo 0000:02:00.0 &gt

# For DPDK-style binding dpdk-devbind.py -b igb_uio 02:00.0 # Or manually echo 0000:02:00.0 > /sys/bus/pci/drivers/ixgbe/unbind echo 0000:02:00.0 > /sys/bus/pci/drivers/uio_pci_generic/bind Run these checks as the same user that executes the job: Add a custom udev rule: If you’ve encountered

lspci -vvs 02:00.0 | grep "Kernel driver" # Use actual PCI id If it shows a kernel driver (e.g., ixgbe ), unbind it and bind to UIO:

Use MAC addresses to identify the correct interface in your script: