A: No, most Xertmt models support single-point pairing. Disconnect one phone before pairing another.
Once connected, you will hear a confirmation chime, and the blue light will pulse slowly. xertmt bluetooth speaker manual
The speaker will automatically reconnect to the last paired device when powered on within range. If it doesn’t, go to your device’s Bluetooth settings and select the Xertmt speaker manually. 6. Playing Audio: Controls and Gestures Once connected, use these controls to manage music: A: No, most Xertmt models support single-point pairing
A: Most newer units default to English. If not, a factory reset (Section 11) usually restores English voice prompts. The speaker will automatically reconnect to the last
| Light Status | Meaning | |--------------|---------| | Fast flashing blue | Pairing mode (ready to connect) | | Slow pulsing blue | Connected to a device | | Solid red | Charging (battery below 90%) | | Red off (when plugged in) | Fully charged | | Flashing red every 5 seconds | Low battery (<15%) | | Blue/Red alternating | Factory reset mode or pairing error | | No light | Powered off or dead battery | Most Xertmt speakers have a 1200mAh to 3600mAh battery, providing 6–24 hours of playtime.
If it doesn’t enter pairing mode automatically (solid blue light), press and hold the Bluetooth button (or Play/Pause button on older models) for 3 seconds until you hear “Pairing” or see blue/red alternating flashes.
Power on your Xertmt speaker. It will automatically enter pairing mode if no devices are remembered. You’ll see a rapidly flashing blue light.
Hello!
