Xnmasticom Top May 2026

Use a mandrel that contacts only the steel backing edge. Never push on the PTFE top surface. Press slowly at 5mm per second. If you hear squeaking, stop—you are galling the material.

Chill the Xnmasticom Top in a freezer for 1 hour. Simultaneously, heat the housing to 80°C (176°F). This thermal differential allows for a slip fit without scraping the PTFE. xnmasticom top

Measure the housing bore. For an Xnmasticom Top sized 20x26x20mm, the bore must be exactly +0.023mm to +0.043mm oversized. Too tight, and the top will bulge inward. Use a mandrel that contacts only the steel backing edge