Manual | Xta-7000 Temperature Controller

Do not change P , I , and D manually unless you understand PID control. Always run Auto-tune first. Chapter 6: The Auto-Tuning Procedure (The Gold Feature) If you have printed the xta-7000 temperature controller manual but skipped to this chapter, stop. Auto-tuning is the single most valuable feature.

If you need the exact manufacturer’s document, check the supplier’s website under “Downloads” or search for “XTA-7000 PID controller instruction manual V2.3”. Always ensure your unit’s firmware revision matches the manual’s edition. xta-7000 temperature controller manual

| Error Code | Meaning | Solution | | :--- | :--- | :--- | | | Sensor input exceeded high range or sensor open (thermocouple). | Check thermocouple wiring; replace sensor. | | LLL | Sensor input below low range or shorted. | Test sensor resistance; inspect for shorts. | | Er1 | Internal EEPROM failure. | Replace controller. (No user fix) | | Er2 | Input type not configured. | Re-enter advanced menu and set Sn parameter. | | - - - | Over-range or under-range. | Check if SV is within sensor limits. | Do not change P , I , and